On 3/06 We Honor The 306ci Ford – A Small Block Made Higher by Scorching Rodders
There are particular engine mixtures which can be so prevalent on the earth of scorching rodding we’re questioning why the unique tools producer didn’t simply construct them itself to begin with. A type of combos is the 306ci Ford small block. Successfully a 302 with a slight bore job, the 306 has powered scorching Mustangs and different Ford fashions for many years. They made nice energy, they breathe higher with extra bore, and so they, like each different engine on the earth reply superbly to energy adders. Under we’ve a few movies to point out off Ford 306ci small blocks getting the job finished on the dyno and on the observe.
Not like the 331ci and 347ci variants of the small block Ford that make use of extra stroke, the little 306 doesn’t run into any of the problems with rod angle or potential reliability issues that a few of these extra deeply stroked engines can have. No, the little 306 will usually run ceaselessly and a day assuming you don’t soften it with nitrous or blow the crank by the underside of the block with enhance.
Heck, because the generally accepted lore goes, the manufacturing unit 302 blocks are good for about 500hp anyway earlier than they break in half, proper? If you’d like a salty little small block on a budget, have your 302 bored, caught again along with a set for bigger solid pistons and hit it with some spray for kicks. Everybody wins and also you’d have a day a 12 months to toast your engine in thanks. See? Good.
Press play under to see some 306ci Ford small block engines at work –
